Konfigurasi simpel bridge di mikrotik haplite
Berikut adalah script otomatis (MikroTik RouterOS CLI) untuk mengonfigurasi RB941-2nD (hAP lite) sebagai Bridge dan fungsi pembatasan kecepatan.
Script Konfigurasi Lengkap
routeros
# -----------------------------------------------------------------------------
# 1. MEMBUAT INTERFACE BRIDGE DAN MENGAKTIFKAN IP FIREWALL
# -----------------------------------------------------------------------------
/interface bridge
add name=bridge-lokal use-ip-firewall=yes
# -----------------------------------------------------------------------------
# 2. MEMASUKKAN SEMUA PORT ETHERNET DAN WLAN KE DALAM BRIDGE
# -----------------------------------------------------------------------------
/interface bridge port
add bridge=bridge-lokal interface=ether1
add bridge=bridge-lokal interface=ether2
add bridge=bridge-lokal interface=ether3
add bridge=bridge-lokal interface=ether4
add bridge=bridge-lokal interface=wlan1
# -----------------------------------------------------------------------------
# 3. KONFIGURASI IP ADDRESS, GATEWAY, DAN DNS
# -----------------------------------------------------------------------------
/ip address
add address=192.168.2.2/24 interface=bridge-lokal network=192.168.2.0
/ip route
add gateway=192.168.2.1
/ip dns
set allow-remote-requests=yes servers=1.1.1.1,8.8.8.8
# -----------------------------------------------------------------------------
# 4. KONFIGURASI SSID WI-FI (WLAN1)
# -----------------------------------------------------------------------------
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n disabled=no distance=indooor \
frequency=auto mode=ap-bridge ssid=MiktoTik-bridge wireless-protocol=802.11
# -----------------------------------------------------------------------------
# 5. MANAJEMEN BANDWIDTH (SIMPLE QUEUE) PER INTERFACE
# Silakan ubah nilai max-limit (contoh di bawah: 5M untuk 5 Mbps)
# -----------------------------------------------------------------------------
/queue simple
add name="Limit-Ether2" target=ether2 max-limit=5M/5M
add name="Limit-Ether3" target=ether3 max-limit=5M/5M
add name="Limit-Ether4" target=ether4 max-limit=5M/5M
add name="Limit-Wlan1" target=wlan1 max-limit=5M/5M