Load Balancing Tomato Firmware

Steps to do load balancing in tomato firmware.

Make sure to have sufficient device resources so that the process can run properly.




  • Go to the tomato config web page, the default is usually http://192.168.1.1

user: root, password: admin.


  • Open the basic tab > adjust the ip address with the internet source address plan so that it doesn't conflict


  • Then Go to Advanced tab > VLAN

uncheck one of the lan interfaces that will be used for the wan 2 function. etc. save and reboot.


  • Back to the basic tab select multiwan, select and adjust to needs.


  • Save. and check status.